Length: 70mm
Depth: 30mm
Overall length: 165mm
Blade Thickness: 3mm
Blade Material: AUS-8 Stainless Steel satin finish

A neat simple blade with a choice of holes for scales that will accept Corby and Lovelace bolts

More...

Dimensions and Specifications

Steel: D2 Steel
Style: Fultang like a Tripe Knife but smaller
Cutting edge: 80mm
Depth: 23mm
Grind: Scandi
Thickness: 2.5mm
Overall Length including rounded nose: 227mm
Fixing: Holes will accept Corby, Loveless and Bull Bolts.

More...

Dimensions and Specifications

Steel: Stainless Steel
Style: Fultang tapered
Cutting edge: 60mm
Depth: 22mm
Grind: Flat with small secondary bevel
Thickness: 4mm in the centre tapering to 1.5mm
Overall Length: 165mm
Fixings: Holes will accept Corby, Loveless and Bull Bolts.

More...

The EZSmith™ brand Boot Skinner Kit is a very high quality modern boot knife/skinner combo design.

It will work well as a compact skinner and/or a concealable boot knife with a tactical handle treatment. This model is 6" overall with a 2-3/4" blade. It also comes standard with stainless steel bolsters and matching ss pins to allow for the perfect builder option design.

The blade thickness is .117" (almost 1/8") and feels great in the hand. The blade is made from AUS8 and is hollow ground. This design features (2) .125" bolster holes, (2) .156" tang holes and a .250" thong hole for handle construction options.

Dimensions:
General Kit Specifications
Boot Skinner
Skill Rating: Level II
Blade Steel: AUS8 stainless steel
RC = 56-58
(Heat Treated/Cryo-Treated for Optimum Blade Performance)
Blade Finish: Satin
Blade Length: 2.75 Inches
Overall Length: 6 Inches
Blade Width: 7/8”
Thickness: .110-.112”

More...

Drop point cub knife kit is a Fultang stainless steel knife blade kit. Which includes a sharpened knife stainless steel blade, stainless pin, stainless guard and a lanyard tube. Please note that handles are not included in the kit.

Blade length: 70 mm

Blade width: 24 mm

Blade thickness: 3,2 mm

Total: 165 mm

Steel: 440A

HRC: 58-60

More...

The Boot Shark fixed blade knife kit is a modern boot-knife-inspired combination design. It will work well as a skinner knife with an upscale handle, or as a classic boot knife with a tactical handle treatment. This boot knife blank model is 7.5" inches in overall length with a 2-5/8" inch blade. The blade thickness is .175" inches. This skinning boot knife kit design feels great in the hand. The dual stainless bolsters are already attached. All you do is add your own handles and finish off with a sand down.

The blade is made from AUS8 stainless steel and is flat ground. This boot knife kit design features (2) .200" handle holes and includes a ¼ inch thong tube hole. Both handle pins are included with model.

General Kit Specifications
Boot Shark
Skill Rating: Level II
Blade Steel: AUS8 stainless steel (RC = 56-58)
(Heat Treated/Cryo-Treated for Optimum Blade Performance)
Blade Finish: Satin
Blade Length: 2-5/8" Inches
Overall Length: 7-1/2" Inches
Blade Width: 1”
Thickness: .175”
Gift Boxed = Yes

More...

A really exceptional blade with a hammer finish to the top giving it a great rustic look and a matt finish

Dimensions: 95 x 30 x 5mm, total length 200mm

Special hammer finished D2 Steel, with a slightly convex scandi grind, finished with a very small bevel. the holes will take Corby, Lovelace and Bull Bolts.

More...

A really exceptional blade HRC 63 - Induction hardened

Blade length: 90 mm
Blade width: 27 mm
Blade thickness: 3,2 mm
Total: 205 mm
Steel: 80CrV2 (HRC 63)
Bolster: -
Holes: 3x 6mm

More...

Polished 440 Stainless Steel. This sits very well in the palm of your hand.

Dimensions: Cutting edge 75mm, total length 192mm, thickness 3.95mm, Depth 32mm. Scandi Grind which is slightly hollow and a secodary bevel.


Holes will accept Corbys, Loveless and Bull Bolts.

More...

A good value blade manufactured by Condor and marked with their name.

BLADE MATERIAL: 2.5 mm -1075 HIGH CARBON STEEL
BLADE LENGTH: 105mm
TOTAL LENGTH: 225mm
BLADE FINISH: Blasted Satin
GRIND: Scandi to zero.

More...

440C satin finish
163 x 80 x 44 x 2.5 mm.

More...