High contrast Damascus steel with a slight concave scandi grind.

Dimensions: 220 x 95 x 28 x 3.85 mm

To go with it a well made brass finger guard that has been finished to match blade, supplied with a fixing pin. All you need to do is polish and buff up.

The holes will accept Corby Bolts or 1/4 inch Rod the smaller holes will accept 3mm rods

This will make up into a beautiful knife.

More...

Random Damascus steel with a slight concave scandi grind.

Dimensions: 220 x 95 x 28 x 3.85 mm

Using our own radius finger guard and bolster a slot will be milled to the precise thickness of each blade and press fitted.

When ordering please specify Brass or Nickel Silver Bolster as a note on checkout

The holes will accept Corby Bolts or 1/4 inch Rod

This will make up into a beautiful knife.

More...

Raindrop Damascus steel with a slight concave scandi grind.

Dimensions: 220 x 95 x 28 x 3.85 mm

Using our own radius finger guard and bolster a slot will be milled to the precise thickness of each blade and press fitted.

When ordering please specify Brass or Nickel Silver Bolster as a note on checkout

The holes will accept Corby Bolts or 1/4 inch Rod

This will make up into a beautiful knife.

More...

Raindrop Damascus steel with a slight concave scandi grind.

Dimensions: 220 x 95 x 28 x 3.85 mm

The holes will accept Corby Bolts or 1/4 inch Rod

This will make up into a beautiful knife.

More...

Tamahagane material

Blade length: 10.5cm

Width 3cm

Thickness: 2.5mm

Handle:10.5cm

The holes will accept Corby Bolts or 5mm Rod

CARE: Maintenance is absolutely essential the blade must be cleaned and dried directly after use. The edge will last much longer than anything you have ever experienced

This will make up into a beautiful knife.

Tamahagane is a type of steel made in the Japanese tradition. The word tama means "precious". The word hagane means "steel" Tamahagane is used to make Japanese swords, knives, and other kinds of tools.
The carbon content of the majority of analysed Japanese swords historically lies between 0.5-0.7 mass%; however, the range extends up to 1.5%

Tamahagane is made of an iron sand (satetsu) found in Shimane, Japan. There are two main types of iron sands: akame satetsu and masa satetsu. Akame is lower quality, masa is better quality. The 'murage' decides the amount of the mixing parts. Depending on the desired result, the murage mixes one or more types of sands.
The iron sand is put in a tatara, a clay tub furnace. The clay tub measures about 4 feet (1.2 m) tall, 12 feet (3.7 m) long and 4 feet (1.2 m) wide. The tub is dried and heated to about 1,000 °C (1800 °F). Then, it is mixed with charcoal to add carbon to the steel so it can be hardened.
The process of making Tamahagane continues for 36-72 hours (a day and a half to three days), depending on how many people work and how much metal is to be obtained. Within an hour of smelting, the iron sand sinks to the bottom, called the bed of fire, in which it will be assessed by colour on whether it became Tamahagane. The iron sand is added every ten minutes, and the mixture is frequently turned over. After the Tamahagane is finished, the clay tub is broken and the steel is removed. The best steel is on the edges of metal block; in this area, the oxidation process is stronger. The quality of Tamahagane is determined by its colour: bright silver pieces are very good for making blades.

More...

San Mai

Blade length: 115mm

Width 33m

Thickness: 3mm

Handle: 110mm

The holes will accept Corby Bolts or 5mm Rod

This will make up into a beautiful knife.

San Mai in the context of metal blade construction, refers to a knife, blade or sword that has the hard steel hagane forming the blade's edge, and the iron/stainless forming a jacket on both sides. It is also the term used to refer to the technique used to create these blades.

"San mai" roughly translates as three flat things, in Japanese (San=three Mai=unit counter for flat objects). The term, and its root honsanmai, has been used to describe that construction method for many hundreds of years, from around 1300 A.D. It refers to when three layers of steel are used. The center is hard, and the side is typically softer.

More...

A DAMASCUS BLADE WITH A HAMMER FINISH. Random pattern

A most unusual Stick Tang blade.

Dimensions: 95 x 30 x 4.5mm. Total length 203

Scandi grind with a slight convex finish and a small secondary bevel, the holes in the tang are big enough to take Corby, Lovelace and Bull Bolts.

More...

DIMENSIONS

Blade Length: 153mm
Blade Depth: 22mm
Thickness: 4mm
Damascus: Random 230 layers.

More...

DIMENSIONS

Blade: 88mm
Blade Depth: 28mm
Total length: 220mm
Thickness: 4.0mm
Grind: Scandi with slight secondary bevel
Layers: 172

More...

DIMENSIONS

Blade: 92mm
Blade Depth: 24mm
Total length: 220mm
Thickness: 4.0mm
Grind: Scandi with slight secondary bevel
Layers: 172

More...

Blade length: 90 mm
Blade width: 24 mm
Blade thickness: 4 mm
Total: 210 mm
Weight: 130 g
Holes 2x4.65, 1x6.4 mm, 4x3.1mm, 2x4.1 mm
Ground: Hollow
Steel: Damascus, carbonsteel O1/1095

More...

DIMENSIONS

Blade: 85mm
Total length: 207mm
Thickness: 4mm
Grind: Scandi
Layers: 172
Fixing Holes: 2 will accept 1/4 inch Lovelace Bolts.
Pattern: Random



To confirm that you are over 18 years old, please enter your date of birth in the box below.