Approx 110mm long

Hole approx 8x5mm

Precision made: Specially imported from the US

Carbide Faced File Guide, Stainless Steel, 70 mm

Dimensions are 100 mm x 15 mm x 65 mm

3.9 mm thick carbides screwed on, HRC 78

Non-magnetic, steel dust does not stick to it

Stainless will not rust

All screws are recessed into the body for easy access on flat platen

Accepts up to 70 mm wide blades, up to 40 mm thick blades and guards

Guide pins are hardened steel for an even more sturdy construction and no chance of jamming

The file guide is used by clamping the blade between the jaws, enabling you to precision file both sides of the blade dead even using files or a grinder. The benefits are blade bevels starting perfectly even, and stick tang shoulders being dead square and even for perfect bolster fit.

The file guide is in solid stainless steel, and will not rust when dunked in water during grinding to keep the blade cool. Steel dust will not stick to the non-magnetic steel.

The face is protected by carbide strips, which only diamond or other exceptionally hard tools will scratch. These are 78 HRC and very hard but: NOTICE ceramic belts can and will damage carbide. This tools is for use with hand tools, or normal aluminum oxide belts if using a grinder. The carbides are 3.9 mm thick and can be replaced if required.

The carbide strips are recessed slightly down into the stainless steel for added protection. This way the strips will not be knocked off, or be under pressure when clamping a blade in the file guide. This also ensures there is less pressure on the carbide strip when clamping in a blade as they back onto a shoulder of steel.

The file guide accepts up to 70 mm wide blades (2.75"), and up to 40 mm (1.6") thick blades.

More...

Knife vice for knifemakers. Both the base and the clamp holding device the can turn 360 degrees for best ergonomics.

A sound and solid construction. Makes it heay to post

The vice is suitable for knife blades up to 50mm in width and 200mm long.

Dimensions:

Base 120x120mm

Clamp length 120mm

Clamp diameter 50mm

More...

Works very well with double endedl bench sander/polishing machine with chucks

More...