Set of 3 Swiss Style Needle Files, great for openning out bolsters and adding finishing touches to all metals prior to final sanding and polishing.

GREAT VALUE!

* Precision Made in the EC

* Flat, half-round and round profiles

*160 long medium cut.

More...

Perfect for gently removing Epoxy Resin from blades especially around Bolsters or for budding dentists!

More...

Set of 10 x 140mm Economic Needle Files.

Perfect for making Bolster slots very accurately

10 different profiles

Medium Cut

100ml perfect for lubricating when working on steel, helps to reduce rust

More...

5 Piece set in a storage case. Files 3.0mm x 140mm with diamond working length of 70mm, flat, square, round, half round and triangle shapes.

More...

10 Piece set in a storage sleeve.
Files 4.5mm x 180mm with diamond working length of 70mm. Perfect for squaring shoulders on Knife Blades
1. Flat
2. Half Round
3. Square
4. Triangle
5. Round
6. Flat Spear
7. Knife
8. Large Triangle
9. Oval
10. Small Fat Oval

More...

10 Piece set in a storage sleeve.
Files 3mm x 140mm with diamond working length of 50mm. Perfect for sharpening leather tools and squaring shoulders on small blades
1. Flat
2. Half Round
3. Square
4. Triangle
5. Round
6. Flat Spear
7. Knife
8. Large Triangle
9. Oval
10. Small Fat Oval

More...

We use this file in our workshop all the time to square up the shoulders of Stik Tangs.

18mm - total length 180mm.

More...

A medium long flat file that is ideal for opening out under sized bolsters.

Cutting Dimensions: 140 x 9.5 x 2.5mm. Total length 190mm

I use this type of file in my workshop all the time, and I thought I might share this secret.

More...

Suitable for brass, nickel, silver & pewter.

thickness: 3.2 mm

total length: 133 mm

I use this type of file in my workshop all the time, and I thought I might share this secret.

More...

Universal collet, accepts most regular needle files and rasps, beautifully turned in hardwood, comfortable to use.

Approx 110mm long

Hole approx 6mm.

Approx 110mm long

Hole approx 8x5mm

Precision made: Specially imported from the US

Carbide Faced File Guide, Stainless Steel, 70 mm

Dimensions are 100 mm x 15 mm x 65 mm

3.9 mm thick carbides screwed on, HRC 78

Non-magnetic, steel dust does not stick to it

Stainless will not rust

All screws are recessed into the body for easy access on flat platen

Accepts up to 70 mm wide blades, up to 40 mm thick blades and guards

Guide pins are hardened steel for an even more sturdy construction and no chance of jamming

The file guide is used by clamping the blade between the jaws, enabling you to precision file both sides of the blade dead even using files or a grinder. The benefits are blade bevels starting perfectly even, and stick tang shoulders being dead square and even for perfect bolster fit.

The file guide is in solid stainless steel, and will not rust when dunked in water during grinding to keep the blade cool. Steel dust will not stick to the non-magnetic steel.

The face is protected by carbide strips, which only diamond or other exceptionally hard tools will scratch. These are 78 HRC and very hard but: NOTICE ceramic belts can and will damage carbide. This tools is for use with hand tools, or normal aluminum oxide belts if using a grinder. The carbides are 3.9 mm thick and can be replaced if required.

The carbide strips are recessed slightly down into the stainless steel for added protection. This way the strips will not be knocked off, or be under pressure when clamping a blade in the file guide. This also ensures there is less pressure on the carbide strip when clamping in a blade as they back onto a shoulder of steel.

The file guide accepts up to 70 mm wide blades (2.75"), and up to 40 mm (1.6") thick blades.

More...

Knife vice for knifemakers. Both the base and the clamp holding device the can turn 360 degrees for best ergonomics.

A sound and solid construction. Makes it heay to post

The vice is suitable for knife blades up to 50mm in width and 200mm long.

Dimensions:

Base 120x120mm

Clamp length 120mm

Clamp diameter 50mm

More...

Works very well with double endedl bench sander/polishing machine with chucks

More...