All parts included to create the above frame-lock folder kit, including standard cocobolo handles.

This kit assembles easily and offers plenty of scope for modifications. This is an excellent piece for learning basic assembly, frame-lock design, file work training, liner test treatments and overlay experimentation. Because of the base design simplicity, it is also a great kit for beginners, requiring no modification to produce a great knife. Full stainless frame-lock design with open-spacer backspine. This model is a super value, and a fun build with nice lockup and action for the money!

General Kit Specifications
Skill Rating: Level I
Blade Steel: 440 Stainless (RC 52-55)
Handle Length: 4 1/2"
Blade Length: 3 1/4"
Overall Length: 7 5/8"
Handle Material: Cocobolo
Pivot: Stainless Steel (pass-through)
Pocket Clip : Stainless (standard)
Washers: Nylon

Printed instructions included

More...

The newly redesigned DDR3 series button lock knife kit offers the advanced kit builder more options in artistic design modification and mechanical performance than any other folding knife kit on the market. Designed to be the finest quality folding knife kit available, and with the added functionality and versatility of the button lock opening system, one will be hard pressed to find a better knife for the money, and one more fun to build and operate.

The DDR3 button lock knife kit comes standard with a 600 grit satin finished 400 stainless blade and pre-radiused bolsters, 400 stainless hardware and satin finished liners for a high-strength precision fit and finish. The hardened 440 stainless steel moderning bowie style blade is precision fit and highly sharpened right out of the box. With extreme quality fit & finish throughout, the DDR3-BL folding knife kit model offers a choice for the knife kit builder that allows the creation of a perfect knife for the job. It is also a favorite of kit builders who offer them as commissioned project pieces.

This folding knife making kit model comes with all of the parts necessary to build the base model design, with the exception of handle materials. The liners have been pre-channeled for a user-created slide safety if desired. The safety slide button is not included with the button lock knife kit, but can be easily created from typical shop materials. The DDR3-BL model ships standard as a manually opening folding knife.

General Kit Specifications
Skill Rating: Level II-IV
Mechanism Type : Button Lock
Blade Steel: 440C Stainless (Heat/Cryo-Treated) RC 56-58
Blade Finish: 600 Grit Satin
Blade Styles: Tactical Grind w/Thumb Rest
Blade Length: 3.60 Inches
Closed Length: 4.50 Inches
Overall Length: 8.10 Inches
Liners: Stainless Steel (Heat treated)

More...

The Bobcat Lockback folding knife making kit has a 2-1/2 inches satin finished, hollow ground blade that is made of AUS-8 steel (with vanadium added). It has been cryogenically treated for additional toughness and edge holding performance and holds a 56-58rc hardness. The bolsters, back-spacers, liners and pins are made of 416 stainless steel for maximum work-ability. This excellent lockback knife kit design is 3-5/8 inches closed and is 6-3/8 inches when open.

Properly built, this folding knife kit will produce a fantastic pocket knife for everyday use. It has fast lines and excellent lockup and action.

Instructions included

Specifications

Skill Rating: Level III (Based on modification desired)

Blade Steel: AUS-8 (heat-treated to RC 56-58)

Handle Length: 3.60 Inches

Blade Length: 2.75 Inches

Handle Material: Not Included

Pivot: Stainless Steel

Bolsters/Lockbar/Backspine: 416 Stainless Steel

Comes with Shim Stock

Gift Boxed: Yes

More...

Premilled scales to fit Camper blades, ready to be attached, complete with liners and Corby Bolts.

More...

Pre drilled to accept Corby Bolts, Black G10 with Red Liners and Brass Corby Bolts.

Instructions included.

More...

Pre drilled to accept Corby Bolts and Lanyard Tube.

More...

Premilled scales.
Stainless cutlers rivets.

Fits all BRISA Trapper knife blades.

A vulcanized fiber or PP liner would be a great insert between blade and scale.

More...

Premilled scales for Brisa necker. Fit both Birsa necker scandi and flat knife blades.

More...

Dimensions:
Blade: 105 x 27 x 4mm. Overall Length 230mm
Thickness: 4mm
Steel: D2
Finish: Satin
Grind : Scandi with a small secondary bevel

The KIT: Predrilled Pink Ivory Scales to accept 1/4" Corby Bolts, black polycarbonate liners, profile guides for Tapered and Bolttle scales.

More...

BeaverCraft bushcraft knife kits are comprehensive sets designed for both beginners and experienced craftsmen interested in creating their own custom bushcraft knives. Each kit includes high-quality components, ensuring a rewarding and educational experience.

Specifications:

Total length – 250 mm

Blade length – 125 mm

Blade width – 35 mm

Blade thickness – 3.5 mm

Handle length – 125 mm

Sheath material – Cowhide leather

Steel material – 1066 Carbon

Grind type – Sabre

Hardness – 58-60 HRC

More...

A set of book matched 9mm scales, that have been predrilled to take 1/4inch brass Corby Bolts. Comes with optional Polycarbonate liners and a template guide for two types of scales. Tapered and Bottle Shape.

These scales will fit all of the Trapper 95 blades.

More...

Pre drilled to accept Corby Bolts, White Paper Micarta with Red Liners and Brass Corby Bolts.

Instructions included.

More...