[sd.hide]-->
HomeSite MapSearchCheckout Store TopUp a LevelContact UsRecent Orders
Online Catalogue | For tool making supplies | Horn, bone, hoof and antler for handles, scales, spacers and insets | Water Buffalo and Bison Products
Quantity:
Size 127mm x 38mm x 7mm. Sold as matching pairs, but there is the occasional fleck of white
Dimensions: As shown on the picture. The last 100 to 125mm is solid and would make excellent handles for a knife or walking stick top.
More...
Dimensions: 9 x 40 x 125mm. These polished scales have some terrific patterns and fit almost any fultang blade.
Dimensions: 8 x 40 x 125mm. These polished scales have some terrific patterns and fit almost any fultang blade.
Dimensions: 8 x 38 x 130mm. These polished scales have some terrific patterns and fit almost any fultang blade.
Dimensions for each piece: 8 x 40 x 130mm. These scales asre highly polised but will need a small amount of sanding and will fit almost any fultang blade. Sold in pairs. The centers have been filled with a creeam coloured resign
3-4 x 107 x 32mm Thickness dimensions very slightly.The would perhaps benefit from a liner to bulk up the thickness
2.5 - 3 x 105 x 30mm Thickness dimensions very slightly.The bone has been surfaced dyed after the jigging process, when polished this would achieve a rustic look. They would perhaps benefit from a liner to bulk up the thickness.
Top two Water Buffalo Jigged Scales Vertical and Horizontal 8 x 40 x 125mmBottom Left Jigged Camel bone, right normal dyed Camel bone.
23-25 x 50 x 150 mm. Good for cutting as scales and Firesteel Tops
These natural sections would be ideally suited for extra-long scales, The final finish will be black.They will need sanding; thicknesses vary from 10-15mm Length 180mm
Quite Chunky but would look good on any kit bag, or a replacement for artificial toggles. Other uses could be a knife handle tip using the two holes for a lanyard.Sizes vary 65 x 20mm Dia
A plain cylinder of boneSize: 32 x 80mm.
A plain cylinder of bone, can be shaped or used as is for a chefs knife.Size: 32 x 110mm.
A plain cylinder of bone, can be shaped or used for mant different purposes.Size: 36 x 12mm.
A plain cylinder of bone, can be shaped or used for mant different purposes.Size: 36 x 30mm.
A plain cylinder of bone, can be shaped or used as is for a chefs knife. Needs Polishing.Size: 25 x 115mm.
Dimensions 30 x 80mmMany uses especially good for large spacers.
Dimensions 36 x 150mmMany uses especially for knife handles
Dimensions 43 mm SquareMany uses especially good for large spacers.
22mm diameter material with occasional darker flecking throughout. Nominally 6 - 7mm in thickness. These pieces polish beautifully and will enhance any joint / capped off section as they polish a little like opal stone.
38 x 6.35mm diameter material with occasional darker flecking throughout. Nominally 6 - 7mm in thickness. These pieces polish beautifully and will enhance any joint / capped off section as they polish a little like opal stone.Nominally 6 - 7mm thick. Also good for making interesting Bolsters..
38 x 6.35mm diameter material with occasional flecking throughout. Nominally 6 - 7mm in thickness. These pieces polish beautifully and will enhance any joint / capped off section as they polish a little like opal stone.Nominally 6 - 7mm thick. Also good for making interesting Bolsters..
Can be used to build up a knife handle with bone sections. Polishes up to a fine gloss black with some very feint markings, which enhances the natural look.36mm dia x 11-12mm.
Can be used to build up a knife handle with bone sections. Polishes up to a fine gloss black with some very feint markings, which enhances the natural look.30mm diam x 6mm.
Can be used to build up a knife handle with bone sections and other materials. This bleached bone polishes up to a fine gloss and is often mistaken for Ivory.30mm dia x 5mm consistently and more.
Can be used to build up a knife handle with bone sections and other materials. This bleached bone polishes up to a fine gloss and is often mistaken for Ivory.30mm diam x 2-4mm.
SPECIAL OFFER WHILE STOCKS LAST! Can be used to build up a knife handle with bone sections and other materials. This bleached bone polishes up to a fine gloss and is often mistaken for Ivory.30mm diam x 2-4mm.
Items: Value: