6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...

6.35mm x 130mm. Difficult to photograph due to the size. This pin will turn any bolster, handle or endcap into something special.

Can be used in conjunction with:

Corby Mill and Drill 6.35 Kit Code:7701

Also Torx Stainless shallow faster, this allows a small section of Mosaic Pin to be fitted. Code: 3303

New Design

More...