Online Catalogue | Knife making supplies | Epoxy Resins and Adhesives
HomeSite MapSearchCheckout Store TopUp a LevelContact Us
OUT OF STOCK
1 Oz Bottle with CapPenetrating formulaFast cureGood for treating porous woodsSuperior wicking action.
1 Oz Bottle with capSlow cureHigh strengthGood gap filling formulaPerfect for sheath making, it makes sure rivets and leather stay fixed, also good for bonding in Mosaic Pins.
1 oz Tube. Great for filling larger gaps in blocks that have minor cracks and pitting, really good with heavy burls and spalted woods. Also can be used in sheath making to enure that rivets and snaps do not come apart.General Instructions: Apply glue to one surface press together for 15 seconds which will create the inital bond, full cure in 24 hours. Best kept in the fridge.
A must for any knifemakers glue shelf. Special gap filling formula, Bonds virtually anything, works on oily surfaces. Especially good for sheath making1oz (28.3g)Once opened this should be stored in a fridge.
Slow setting Epoxy Resin from Araldite, remaining respositional for up to 2 hours sets in 12 hours, dries clear and sands down very well.2 x 15ml tubes.
A great way to dispense this slow setting Epoxy Resin from Araldite, remaining respositional for up to 2 hours sets in 12 hours, dries clear and sands down very well.The equivalent of 2 x 15ml tubes.
A new Resin 4oz Kit from the USA.BladeBond Ultra is an unadulterated high performance Polyamine based epoxy system designed to give superior results under extreme conditions. BladeBond Ultra exhibits outstanding permanence on a wide variety of surfaces including hard to bond substrates like oily woods and some thermoplastics. BladeBond Ultra will NEVER shrink and is formulated to retain flexibility under all environmental circumstances. Ultra is measured and mixed in a convenient 1:1 ratio by volume, and has a pot life of 45 min, at 70 degrees Fahrenheit. Usable cure is achieved in 12 hours, but can be force cured at 125 degrees in 2 hours.. When fully cured BladeBond Ultra can be machined, drilled and tapped, and is totally immune to, and unaffected by water, rot and most common solvents and chemicals. We have tested this product in our workshop and it works especially well when bonding Woolly Mammoth Ivory to Damascus Fultang blades. Any excess resin can be removed with Acetone before it cures.
A new HI VISCOUS Resin 6oz Kit from the USA.BladeBond HT has been specially formulated for hidden tang applications.HT is measured and mixed in a convenient 2:1 ratio by volume, and has a pot life of 20 min, at 70 degrees Fahrenheit. Usable cure is achieved in 12 hours. When fully cured BladeBond HT can be machined, drilled and tapped, and is totally immune to and unaffected by water, rot and most common solvents and chemicals. We have tested this product in our workshop and it works especially well when working with hollow tooth's and oversized slots in blocks of wood. Any excess resin can be removed with Acetone before it cures.
This is an INCREDIBLE system, with the highest heat resistance of any off the shelf epoxy on the open market. This REALLY gives the builder a cushion during the handle shaping process, so that excessive heat build up doesn't destroy the scale to tang bond. Where Ultra and West G-Flex will max out around 170 F (76 C), Extreme is good up to 245 F (118 C). Additionally it has very high peel and shear strength, and is designed to withstand high impact forces as well.Any excess resin can be removed with Acetone before it cures.We have tested this in our workshop and it is excellent value!